139th Canton Fair · Guangzhou · Phase 1 Recap
ERAYAK Canton Fair 2026: Generators, Pumps, and Portable Power
Guangzhou, China — April 2026.ERAYAK, the international power-solutions brand of Zhejiang Leiya Electronics Co., Ltd., presented a broader product portfolio during Phase 1 of the 139th China Import and Export Fair. The company’s event materials list two exhibition locations: Hall 17.1, Booth N12, and Hall 6.0, Booth B31–32.
The ERAYAK Canton Fair 2026 display brought together four product groups: 5–13kW open-frame inverter generators, 2–6 inch engine-driven water pumps, the modular “Power Cube” battery-inverter concept, and portable Power Stations for backup and mobile use. This post-event report summarizes what was shown, what each category may offer channel buyers, and which technical details should be confirmed before sampling or placing a wholesale order.
The 139th Canton Fair and ERAYAK’s Dual-Booth Display
The 139th Canton Fair was held in three phases at the China Import and Export Fair Complex in Guangzhou. Phase 1 ran from April 15 to April 19, 2026, covering categories that included electronics, electrical products, power machinery, general machinery, agricultural machinery, new energy, hardware, and tools.
For ERAYAK, a dual-booth presentation created room to show both established portable-power categories and newer concepts. Rather than treating every display as a finished specification for every market, distributors should view a trade-show showcase as the beginning of the sourcing process. Voltage, frequency, sockets, phase configuration, emissions documentation, battery chemistry, accessories, packaging, and certification scope still need to be frozen for the exact order.
Product Highlight 1: 5–13kW Open-Frame Inverter Generators
The high-power generator display was built around a broad open-frame inverter lineup intended for commercial, agricultural, jobsite, event, and backup-power channels. An open frame improves access for transport, inspection, and service, while inverter control is used to regulate the final AC output.
For example, ERAYAK’s current EYG6500iD product page lists 5,000W rated power, 5,500W maximum power, 50/60Hz options, 18L fuel capacity, inverter control, and total harmonic distortion of no more than 3%. Those figures support a low-THD commercial generator position for that model, but they do not prove that every 5–13kW unit has THD below 1%, identical runtime, or the same protection package.
What the generator series can help channel buyers cover
| Market need | Suitable product direction | Details to confirm before ordering |
|---|---|---|
| Contractor and maintenance work | Mid-power open-frame inverter model | Rated watts, motor starting demand, outlets, frame and wheel configuration |
| Agricultural equipment and charging | Higher-output single- or three-phase model | Charger input, phase, per-phase current, THD, grounding and plug type |
| Event and mobile commercial power | Low-THD generator with stable voltage and frequency | Noise test conditions, cable plan, expected load profile and runtime |
| Selected backup loads | Correct voltage and output configuration | Transfer equipment, local electrical rules, neutral arrangement and installation method |
Claims that should remain model-specific
A distributor should not publish one specification across the complete range unless the final data sheet confirms it. In particular, verify:
- Rated power versus maximum or surge power.
- Single-phase, three-phase, or selectable output behavior.
- The exact THD limit and the load point used for testing.
- Noise distance, load percentage, ECO setting, test surface, and background noise.
- Fuel consumption and runtime at stated loads.
- Low-oil, overload, short-circuit, CO, and temperature-related protection by model.
- Approved emissions and electrical documentation for the destination market.
The original event draft described sub-1% THD, up to 20% fuel reduction, full-load noise below an industry average, and more than 400 hours of trouble-free continuous operation. Those statements require test reports with clear model numbers and conditions. The refreshed article therefore presents the series without turning exhibition messaging into a universal guarantee.
Product Highlight 2: 2–6 Inch Engine-Driven Water Pumps
ERAYAK also displayed water-pump products covering nominal connection sizes from 2 to 6 inches. This category is relevant to agricultural irrigation, drainage, pond management, flood response, construction dewatering, and municipal service channels.
Pump diameter alone does not determine whether a model fits a job. A buyer sourcing a water-pump range should compare hydraulic performance and the type of water being moved.
Water-pump sourcing checklist
| Parameter | Why it matters |
|---|---|
| Maximum flow | Indicates the theoretical volume delivered under specified conditions |
| Maximum head | Shows how high the pump can lift water, not the flow available at every height |
| Performance curve | Allows buyers to see flow at the actual working head |
| Suction lift | Affects placement relative to the water source |
| Clean-water, semi-trash, or trash design | Determines allowable debris and solids handling |
| Maximum solids size | Must be stated before claiming sand, slurry, or anti-clogging capability |
| Pump body and impeller material | Influences corrosion, abrasion resistance, weight, and cost |
| Seal and service-part access | Affects maintenance time and local after-sales support |
Product Highlight 3: The Modular “Power Cube” Battery-Inverter Concept
The “Power Cube” display explored a different type of portable power: an inverter platform combined with detachable battery interfaces. Company event materials describe single-, dual-, and triple-battery configurations, USB and Type-C outputs, work-light functions, market-specific socket modules, and a jump-start connection on selected higher-battery configurations.
For tool retailers and battery-platform brands, the commercial idea is attractive because one inverter body may be adapted around batteries that customers already use. However, “cross-brand compatibility” must never be treated as automatic electrical compatibility.
Compatibility questions for Power Cube sourcing
- Approved battery brands, series, voltages, and pack models.
- Whether compatibility is native or requires a replaceable adapter base.
- Low-voltage cutoff, overcurrent protection, temperature monitoring, and battery communication.
- Continuous AC output, surge output, DC and USB output limits.
- Rules for mixing batteries with different capacity, age, or state of charge.
- Socket-module replacement procedure and market certification.
- Jump-start voltage, current, cable rating, vehicle compatibility, and safety instructions.
Product Highlight 4: Portable Power Stations for Backup and Mobile Use
Portable power stations formed the fourth part of the ERAYAK Canton Fair 2026 display. This category can serve outdoor recreation, mobile offices, field service, event equipment, selected household backup loads, and solar-supported charging applications.
Current ERAYAK product pages show that specific portable-power-station models may support AC, vehicle, and solar charging. For example, the BDS-1500AP2 page lists a 1,500W pure sine wave output, a 1,023Wh NMC battery, AC charging, car charging, solar input, multiple USB outputs, and a specified UPS switching mode. These specifications apply to that product, not automatically to every portable power station shown at the fair.
What the Canton Fair Display Means for Distributors
A trade fair is most valuable when it shortens the path from an initial product idea to a controlled sample project. ERAYAK’s four product groups allow distributors to discuss several channel strategies at one time:
- A contractor range combining generators and dewatering pumps.
- An agriculture portfolio combining pump products, high-output generators, and mobile charging.
- An outdoor and RV portfolio built around portable generators and power stations.
- A hardware or tool-channel program using modular battery inverters.
- Private-label projects with localized sockets, voltage, frequency, packaging, branding, and accessories.
The next step should not be an immediate catalog upload. It should be a structured technical review.
From Exhibition Sample to Wholesale Purchase Order
Define the market
Confirm country, channel, customer, load, climate, application, and certification needs.
Freeze the specification
Lock model, power, voltage, phase, sockets, fuel or battery, accessories, labels, and packaging.
Approve a sample
Test the same configuration that will be produced, including load, protection, charging, and application-specific checks.
Match documents
Confirm certificates, reports, engine or battery versions, labels, and model scope.
Write acceptance terms
Define inspection, sampling, traceability, delivery, change control, spare parts, and warranty responsibility.
ERAYAK Manufacturing and OEM Support
Zhejiang Leiya Electronics Co., Ltd. identifies itself as a manufacturer of generators and energy-storage products, with 21 years of production experience and a reported manufacturing area of 36,194 square meters. Its public OEM service process covers requirement confirmation, sample and order development, production, product testing, final inspection, optional customer inspection, packaging, shipment, traceability, and after-sales support.
These capabilities provide a useful framework for distributor and private-label discussions. They do not replace model-level verification, especially when a project includes new battery adapters, regional sockets, new emissions configurations, or claims about specific equipment compatibility.
Post-Show Follow-Up for the 139th Canton Fair
Phase 1 of the 139th Canton Fair ended on April 19, 2026. Buyers who reviewed the ERAYAK display can now continue the discussion by requesting the current catalog, model-level specifications, sample availability, certification files, OEM options, and commercial quotation.
Because configurations and availability can change after a trade show, current pricing, minimum order quantities, lead time, sample policy, and market availability should be confirmed in a formal quotation rather than taken from opening-day promotional material.
Frequently Asked Questions
When was the 139th Canton Fair held?
The fair was held in three phases in Guangzhou. Phase 1 ran from April 15 to April 19, 2026.
Where did ERAYAK exhibit?
The company-provided event draft lists Hall 17.1, Booth N12, and Hall 6.0, Booth B31–32. The exhibition has ended, so buyers should use current company contact information for follow-up.
Did ERAYAK show a complete 5–13kW generator range?
The event materials presented the display as a 5–13kW open-frame inverter series. Exact model availability, rated power, phase, voltage, runtime, noise, and certification must be confirmed from current model-level specifications.
Does every generator have THD below 1%?
The available public information does not support applying a sub-1% THD claim across the complete range. Use the figure from the final approved product data sheet.
Is Power Cube compatible with every tool battery?
No universal compatibility should be assumed. Approved battery brands, voltage, pack models, adapter bases, protection logic, and operating limits must be documented.
Do all portable power stations support AC, solar, and car charging?
Some specific models list all three methods, but charging options and limits should be checked by exact model.
How can a distributor request a proposal?
Provide the target country, application, power range, voltage, frequency, sockets, quantity, certification needs, branding requirements, and launch schedule.
Continue the Product Discussion After Canton Fair 2026
Explore ERAYAK’s power products, review its manufacturing background, or submit an OEM and wholesale inquiry. Ask for the current catalog, final specification, applicable certificates, sample lead time, production lead time, and inspection plan for the exact configuration.
